Rcbs Neck Sizer Dies 221 Rem. Fireball Specification Information







HOME PAGE PRODUCTS





Rcbs Neck Sizer Dies 221 Rem. Fireball Specification Information
Home » RCBS Rifle Dies Specification Info

Rcbs Neck Sizer Dies 221 Rem. Fireball Specification Information


Rifle Dies by RCBS



Specification information: Neck sizing dies size only the case neck of the cartridge, not the shoulder or the case body. Use neck dies when cases are fired in the same rifle and a close cartridge case to chamber fit is desired. The neck die will size the neck, decap the spent primer, then size for correct bullet tension with the expander ball. Neck dies come in an rcbs plastic die box and will fit all 7/8 to 14 reloading presses. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 10830.

Indicative Price: USD 31.99
(for Actual Current Price, possibly lower,
please click below)


More Info & Supplier : click here


For more high specification gun & shooting products : click here

Try Search on this site - find exactly what you need! Click below:








Visitors interested in this item were also interested in the following:

Rcbs Bullet Seater Dies 308 Win Specification Information
Rcbs Bullet Seater Dies 308 Win Specification Information

USD 26.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: Rcbs bullet seaters may also be purchased separately. Some reloaders like to have a separate seater die adjusted for each different bullet they shoot, or for different rifles of the same cartridge. Rcbs seater dies have built-in taper or roll crimp ring appropriate for the cartridge. Seater dies are packed in an rcbs plastic die box and will fit any 7/8 to 14 reloading press. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 15538.

More Details : click here

SEARCH this site : click here

Rcbs X Full Length Die Set X Die 2 Die Set 7mm Rem Mag Specification Information
Rcbs X Full Length Die Set X Die 2 Die Set 7mm Rem Mag Specification Information

USD 50.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: Trim the case once-never trim again! the x-sizer die looks like a regular full length sizer die. Inside, the die features a specially designed mandrel with an expander ball and decapping pin attached. The mandrel is what the x-die is all about. The patented x-sizer die eliminates the need for repeated trimming after an initial trim of .020" off the maximum case length to standardize the case. The x-die doesn't shorten the length of the case: the mandrel reduces the growth rate as the case grows as a result of the case mouth-contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case d mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 37612.

More Details : click here

SEARCH this site : click here

Rcbs 264 Lbc Small Base Sizer Die 264 Lbc Ar Small Base Sizer Die Specification Information
Rcbs 264 Lbc Small Base Sizer Die 264 Lbc Ar Small Base Sizer Die Specification Information

USD 63.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: The 264 lbc-ar small base sizer die is for bottleneck type cases used in tight-chambering semi-automatic, pump or lever-action firearms. The sizer resizes cases below saami minimums, reducing the shoulder and body by a few thousandths. It also de-primes the case. Note: not recommended for ammunition used in bolt-action rifles. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 16431.

More Details : click here

SEARCH this site : click here

Rcbs 22 K Hornet Seater Die 22 K Hornet Bullet Seating Die Specification Information
Rcbs 22 K Hornet Seater Die 22 K Hornet Bullet Seating Die Specification Information

USD 37.49
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: The rcbs 22 k-hornet seater die seats the bullet and has a built-in roll crimper to secure the bullet at the same time. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 26238.

More Details : click here

SEARCH this site : click here

Rcbs 300 Winchester Magnum Trim Die Specification Information
Rcbs 300 Winchester Magnum Trim Die Specification Information

USD 36.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: This 300 winchester magnum hardened trim die is designed to be used with a file to run a case into a die and cut it to length. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 15365.

More Details : click here

SEARCH this site : click here

Rcbs 270 Winchester Gold Medal Match Bushing Full Length Die Set 270 Winchester Bushing Full Length Die Set Specification Information
Rcbs 270 Winchester Gold Medal Match Bushing Full Length Die Set 270 Winchester Bushing Full Length Die Set Specification Information

USD 130.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: The 270 winchester gold medal match series comprises the finest reloading dies built by rcbs. The two-die full-length neck bushing set includes the full-length neck bushing sizer die and a seater die. The sizer uses a self-centering changeable neck bushing to let reloaders precisely set the amount of tension on the bullet. This reduces work-hardening of the case neck brass, prolonging case life and increasing accuracy. However, getting these benefits requires the use of high-end brass with consistent neck thicknesses. By removing the neck bushing, the full length sizing die can also be used as a bump die to set headspace back the desired amount. Neck bushings (sold separately) are availab mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 13505.

More Details : click here

SEARCH this site : click here

Rcbs 38 40 Winchester 3 Die Set Specification Information
Rcbs 38 40 Winchester 3 Die Set Specification Information

USD 73.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: The 38-40 winchester 3-die roll crimp set is for loading straight-wall cartridges. Its steel sizer die sizes the case and de-primes. Note: cases must be lubricated. The expander die expands the case to the proper diameter to accept the bullet, and it imparts case mouth flare/bell for bullet feeding. The seater die seats the bullet and roll crimps. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 35605.

More Details : click here

SEARCH this site : click here

Rcbs Full Length Sizer Dies 7.5mm Schmidt Rubin Specification Information
Rcbs Full Length Sizer Dies 7.5mm Schmidt Rubin Specification Information

USD 31.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: Rcbs full length sizer dies can be purchased individually. Many reloaders use an individual full length die if they are neck sizing most of the time, or if they are seating bullets with hand dies. Rcbs full length dies have vents to prevent case damage from trapped air or excessive lube. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 33529.

More Details : click here

SEARCH this site : click here

Rcbs Neck Sizer Dies 240 Weatherby Mag Specification Information
Rcbs Neck Sizer Dies 240 Weatherby Mag Specification Information

USD 31.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: Neck sizing dies size only the case neck of the cartridge, not the shoulder or the case body. Use neck dies when cases are fired in the same rifle and a close cartridge case to chamber fit is desired. The neck die will size the neck, decap the spent primer, then size for correct bullet tension with the expander ball. Neck dies come in an rcbs plastic die box and will fit all 7/8 to 14 reloading presses. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 33230.

More Details : click here

SEARCH this site : click here

Rcbs 44 40 Wnchester Cowboy Expander Die 44 40 Winchester Expander Die Specification Information
Rcbs 44 40 Wnchester Cowboy Expander Die 44 40 Winchester Expander Die Specification Information

USD 28.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: The rcbs 44-40 winchester expander die expands the case to the poper diameter to accept unjacketed lead bullets and it imparts case mounth flare/bell for easier bullet feeding during the seating process. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 18857.

More Details : click here

SEARCH this site : click here

Rcbs 40 65 Winchester Cowboy Sizer Die 40 65 Winchester Sizer Die Specification Information
Rcbs 40 65 Winchester Cowboy Sizer Die 40 65 Winchester Sizer Die Specification Information

USD 42.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: The rcbs 40-65 winchester steel cowboy sizer die sizes the case and de-primes. Cases must be lubricated prior to sizing. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 36656.

More Details : click here

SEARCH this site : click here

Rcbs 30 Thomson Center Neck Die 30 Thompson Center Neck Die Specification Information
Rcbs 30 Thomson Center Neck Die 30 Thompson Center Neck Die Specification Information

USD 31.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: The rcbs 30 thomson center neck sizer die features an expander-decapping unit. It resizes the case neck only (it doesn't touch the shoulder or body) and de-primes. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 25230.

More Details : click here

SEARCH this site : click here

Rcbs 264 Lbc Ar Neck Die Specification Information
Rcbs 264 Lbc Ar Neck Die Specification Information

USD 59.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: The rcbs 264 lbc-ar neck sizer die features an expander-decapping unit. It resizes the case neck only (it doesn't touch the shoulder or body) and de-primes. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 16430.

More Details : click here

SEARCH this site : click here

Rcbs 257 Wetherby Magnum Neck Die Set 257 Weatherby Magnum Neck Die Set Specification Information
Rcbs 257 Wetherby Magnum Neck Die Set 257 Weatherby Magnum Neck Die Set Specification Information

USD 64.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: This 257 weatherby magnum two-die neck die set is for bottleneck cases to be fired in bolt-action rifles only-specifically, cases fired out of a specific rifle and neck-sized to go back into the same rifle. The set consists of a neck sizer die with an expander-decapping unit, and a seater die with bullet seater plug. The neck sizer die resizes the neck only (it doesn't touch the shoulder or body) and de-primes. The included seater die has a built-in roll crimper to secure the bullet at the same time it's seated. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 12602.

More Details : click here

SEARCH this site : click here

Rcbs Bullet Seater Dies 7mm Rem Saum Specification Information
Rcbs Bullet Seater Dies 7mm Rem Saum Specification Information

USD 26.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: Rcbs bullet seaters may also be purchased separately. Some reloaders like to have a separate seater die adjusted for each different bullet they shoot, or for different rifles of the same cartridge. Rcbs seater dies have built-in taper or roll crimp ring appropriate for the cartridge. Seater dies are packed in an rcbs plastic die box and will fit any 7/8 to 14 reloading press. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 31138.

More Details : click here

SEARCH this site : click here






  • FROM SAME CATEGORY : RCBS Rifle Dies Specification Info : click here!

  • PRODUCT LIST : by product category : click here!
    		•
    307-2-RGB




    Try Search on this site - find exactly what you need! Click below:




    Home » RCBS Rifle Dies Specification Info
    Item on this page: Rcbs Neck Sizer Dies 221 Rem. Fireball Specification Information

    Home Page Search Products Contact Us Privacy Policy


    Copyright © USAGunCache.com : 1997 - 2026 : All rights reserved. 140-UNI