Rcbs Neck Expander Dies For Cast Bullets Neck Expander Die 0.358" Specification Information
Rifle Dies by RCBS
|
Specification information: To eliminate deforming the base and shaving lead off the sides of your lead rifle bullets during seating. Rcbs strongly recommends using their neck expander die. In one step, the neck expander die expands the neck and slightly flares the case mouth of your bottle neck cases. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 39831.
 Indicative Price: USD 28.49
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting products : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Rcbs Gold Medal Match Seater Die 6mm Creedmoor Gold Medal Match Seater Die Specification Information
USD 108.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: Rcbs is proud to introduce the gold medal series of neck bushing rifle dies. This changeable diameter neck bushing type of die has been used by bench rest and long range precision shooters for years. Due to variability in neck brass thickness, rcbs standard dies size the neck below your desired diameter and then pull an expander ball through to get the proper bullet tension. The gold medal sizing die features a self-centering, changeable neck bushing that allows you to precisely set the amount of tension on the bullet. This reduces work hardening of the case neck brass, prolonging case life and increasing accuracy. Neck bushings are available in .001" increments from .189&rdquo mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 31849.
More Details : click here
SEARCH this site : click here
|
|
|
Rcbs 338 Winchester Magnum X Die Full Length Sizer Die Specification Information
USD 42.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: Trim a bottleneck case once, and never trim again with the 338 winchester magnum x die full length sizer. Its specially designed mandrel has an expander ball and decapping pin attached. The patented design eliminates the need for repeated trimming after an initial trim of .020 inch off the maximum length to standardize the case. The x die doesn't shorten the length of the case: the mandrel reduces the growth caused by the case mouth contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the x-die will initial mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 39309.
More Details : click here
SEARCH this site : click here
|
|
|
|
Rcbs 7mm Remington Magnum Small Base Die Set Specification Information
USD 39.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: This two-die set is for 7mm remington magnum cases used in tight-chambering semi-automatic, pump or lever-action rifles. It consists of a small base sizer with an expander-decapping unit and regular seater die with seater plug. The sizer resizes cases below saami minimums, reducing the shoulder and body by a few thousandths. It also de-primes the case. The included seater die has a built-in roll crimper to secure the bullet at the same time it's seated. To seat bullets without crimping, simply unscrew the die until the crimp ring no longer engages the case mouth. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 13603.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Rcbs Neck Expander Dies For Cast Bullets Neck Expander Die 0.358" Specification Information
|
 Copyright © USAGunCache.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
