Rcbs 7 30 Waters Neck Die Set Specification Information
Rifle Dies by RCBS
|
Specification information: This 7-30 waters two-die neck die set is for bottleneck cases to be fired in bolt-action rifles only-specifically, cases fired out of a specific rifle and neck-sized to go back into the same rifle. The set consists of a neck sizer die with an expander-decapping unit, and a seater die with bullet seater plug. The neck sizer die resizes the neck only (it doesn't touch the shoulder or body) and de-primes. The included seater die has a built-in roll crimper to secure the bullet at the same time it's seated. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 34802.
 Indicative Price: USD 64.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting products : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Rcbs 6.5x57mm Mauser Full Length Die Set Specification Information
USD 65.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: This 6.5x57mm mauser two-die full length die set is intended for reloading bottleneck cases, and consists of a full-length sizer die with an expander-decapping unit, and a seater die with bullet seater plug. The full-length sizer die brings the case to saami minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included seater die has a built-in roll crimper to secure the bullet at the same time as it's seated. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 32801.
More Details : click here
SEARCH this site : click here
|
|
|
Rcbs Full Length Die Sets Full Length 2 Die Set 218 Bee Specification Information
USD 36.49
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: Full length die sets are for bottleneck rifle and pistol cases, and they include a full length sizing die and a seater die. The full length die will bump the shoulder of the case to extent the die is adjusted up or down in the press. We suggest using a cartridge headspace gage tool to get the correct shoulder bump. The full length die also sizes the body of the case so it will chamber easily for the next firing, then the die decaps the spent primer. The expander ball passes through the neck of the case and sizes the neck to the correct tension. Cases must be lubricated before full length sizing. The rcbs seater dies for bottleneck cases will seat bullets correctly in full length sized ca mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 10001.
More Details : click here
SEARCH this site : click here
|
|
|
Rcbs 8x57mm Mauser Neck Die Set Specification Information
USD 39.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: This 8x57mm mauser two-die neck die set is for bottleneck cases to be fired in bolt-action rifles only-specifically, cases fired out of a specific rifle and neck-sized to go back into the same rifle. The set consists of a neck sizer die with an expander-decapping unit, and a seater die with bullet seater plug. The neck sizer die resizes the neck only (it doesn't touch the shoulder or body) and de-primes. The included seater die has a built-in roll crimper to secure the bullet at the same time it's seated. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 15902.
More Details : click here
SEARCH this site : click here
|
|
|
Rcbs Neck Sizer Dies 7mm Stw Specification Information
USD 31.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: Neck sizing dies size only the case neck of the cartridge, not the shoulder or the case body. Use neck dies when cases are fired in the same rifle and a close cartridge case to chamber fit is desired. The neck die will size the neck, decap the spent primer, then size for correct bullet tension with the expander ball. Neck dies come in an rcbs plastic die box and will fit all 7/8 to 14 reloading presses. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 26630.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Rcbs 7 30 Waters Neck Die Set Specification Information
|
 Copyright © USAGunCache.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
