Rcbs 44 40 Winchester 3 Die Set Specification Information
Rifle Dies by RCBS
|
Specification information: The 44-40 winchester 3-die roll crimp set is for loading straight-wall cartridges. Its steel sizer die sizes the case and de-primes. Note: cases must be lubricated. The expander die expands the case to the proper diameter to accept the bullet, and it imparts case mouth flare/bell for bullet feeding. The seater die seats the bullet and roll crimps. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 18805.
 Indicative Price: USD 41.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting products : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Rcbs 240 Weatherby Magnum Neck Die Set Specification Information
USD 39.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: This 240 weatherby magnum two-die neck die set is for bottleneck cases to be fired in bolt-action rifles only-specifically, cases fired out of a specific rifle and neck-sized to go back into the same rifle. The set consists of a neck sizer die with an expander-decapping unit, and a seater die with bullet seater plug. The neck sizer die resizes the neck only (it doesn't touch the shoulder or body) and de-primes. The included seater die has a built-in roll crimper to secure the bullet at the same time it's seated. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 33202.
More Details : click here
SEARCH this site : click here
|
|
|
Rcbs Neck Sizer Dies 204 Ruger Specification Information
USD 31.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: Neck sizing dies size only the case neck of the cartridge, not the shoulder or the case body. Use neck dies when cases are fired in the same rifle and a close cartridge case to chamber fit is desired. The neck die will size the neck, decap the spent primer, then size for correct bullet tension with the expander ball. Neck dies come in an rcbs plastic die box and will fit all 7/8 to 14 reloading presses. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 10330.
More Details : click here
SEARCH this site : click here
|
|
|
Rcbs 32 40 Winchester Neck Die Set Specification Information
USD 78.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: This 32-40 winchester two-die neck die set is for bottleneck cases to be fired in bolt-action rifles only-specifically, cases fired out of a specific rifle and neck-sized to go back into the same rifle. The set consists of a neck sizer die with an expander-decapping unit, and a seater die with bullet seater plug. The neck sizer die resizes the neck only (it doesn't touch the shoulder or body) and de-primes. The included seater die has a built-in roll crimper to secure the bullet at the same time it's seated. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 32502.
More Details : click here
SEARCH this site : click here
|
|
|
Rcbs Neck Sizer Dies 7mm Stw Specification Information
USD 31.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: Neck sizing dies size only the case neck of the cartridge, not the shoulder or the case body. Use neck dies when cases are fired in the same rifle and a close cartridge case to chamber fit is desired. The neck die will size the neck, decap the spent primer, then size for correct bullet tension with the expander ball. Neck dies come in an rcbs plastic die box and will fit all 7/8 to 14 reloading presses. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 26630.
More Details : click here
SEARCH this site : click here
|
|
|
Rcbs 338 Ruger Compact Magnum Full Length Die Set Specification Information
USD 36.49
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: This 338 ruger compact magnum two-die full length die set is intended for reloading bottleneck cases, and consists of a full-length sizer die with an expander-decapping unit, and a seater die with bullet seater plug. The full-length sizer die brings the case to saami minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included seater die has a built-in roll crimper to secure the bullet at the same time as it's seated. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 27301.
More Details : click here
SEARCH this site : click here
|
|
|
Rcbs X Full Length Die Set X Die 2 Die Set 6.5x55mm Swede Specification Information
USD 63.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: Trim the case once-never trim again! the x-sizer die looks like a regular full length sizer die. Inside, the die features a specially designed mandrel with an expander ball and decapping pin attached. The mandrel is what the x-die is all about. The patented x-sizer die eliminates the need for repeated trimming after an initial trim of .020" off the maximum case length to standardize the case. The x-die doesn't shorten the length of the case: the mandrel reduces the growth rate as the case grows as a result of the case mouth-contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case d mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 38412.
More Details : click here
SEARCH this site : click here
|
|
|
Rcbs 204 Ruger Neck Die Set Specification Information
USD 39.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: This 204 ruger two-die neck die set is for bottleneck cases to be fired in bolt-action rifles only-specifically, cases fired out of a specific rifle and neck-sized to go back into the same rifle. The set consists of a neck sizer die with an expander-decapping unit, and a seater die with bullet seater plug. The neck sizer die resizes the neck only (it doesn't touch the shoulder or body) and de-primes. The included seater die has a built-in roll crimper to secure the bullet at the same time it's seated. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 10302.
More Details : click here
SEARCH this site : click here
|
|
|
Rcbs 243 Wssm Neck Die Set Specification Information
USD 39.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: This 243 wssm two-die neck die set is for bottleneck cases to be fired in bolt-action rifles only-specifically, cases fired out of a specific rifle and neck-sized to go back into the same rifle. The set consists of a neck sizer die with an expander-decapping unit, and a seater die with bullet seater plug. The neck sizer die resizes the neck only (it doesn't touch the shoulder or body) and de-primes. The included seater die has a built-in roll crimper to secure the bullet at the same time it's seated. Mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 11602.
More Details : click here
SEARCH this site : click here
|
|
|
Rcbs 223 Wssm Gold Medal Match Bushing Neck Die Set 223 Wssm Bushing Neck Die Set Specification Information
USD 140.99
(Indicative price - actual current price possibly lower)
RCBS Rifle Dies Specification Info
Specification information: The 223 wssm gold medal match series comprises the finest reloading dies built by rcbs. The two-die neck bushing set includes the neck bushing sizer die, which resizes only the case neck, and a seater die. This changeable diameter neck bushing die has been trusted by benchrest and long-range precision shooters for years. It lets reloaders precisely set the amount of tension on the bullet, reducing work-hardening of the case neck brass, prolonging case life and increasing accuracy. However, getting these benefits requires the use of high-end brass with consistent neck thicknesses. Neck bushings (sold separately) are available in .001-inch increments from .189-inch to .365-inch. Note: neck mfg: rcbs. Reliable & durable rifle dies by RCBS. Manufacturer MPN: 10506.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Rcbs 44 40 Winchester 3 Die Set Specification Information
|
 Copyright © USAGunCache.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
