Kart Handgun Barrels Specification Info
|
|
|
 Kart Precision Barrel 1911 Xact Fit Barrel Kit 5" Barrel 9mm Fits N/R Specification Information
USD 217.99
(Indicative price - actual current price possibly lower)
Specification information: Install a precision quality barrel using just four small hand tools. The only fitting required is to adjust lockup with the two raised pads located on either side of the rear locking groove, cut the barrel hood to correct length and fit the bushing to the slide. A national match bushing is pre-fit to the barrel; has oversize o.D. For precise fitting to slide. Bottom lugs are fully finished and the correct length link installed to save hours of work. Mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. (n/r) non-ramped. (w/n) wilson/nowlin ramp. (c/p) clark/para ramp. Ramped barrels require machining of frame. Requires gunsmith fitting. Includes instructions. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-001-009.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Xact Fit Barrel Kit 5" Barrel .40 S&W Fits C/P Specification Information
USD 252.99
(Indicative price - actual current price possibly lower)
Specification information: Install a precision quality barrel using just four small hand tools. The only fitting required is to adjust lockup with the two raised pads located on either side of the rear locking groove, cut the barrel hood to correct length and fit the bushing to the slide. A national match bushing is pre-fit to the barrel; has oversize o.D. For precise fitting to slide. Bottom lugs are fully finished and the correct length link installed to save hours of work. Mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. (n/r) non-ramped. (w/n) wilson/nowlin ramp. (c/p) clark/para ramp. Ramped barrels require machining of frame. Requires gunsmith fitting. Includes instructions. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-003-040.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Precision Quality Barrel 6" 9mm Wilson/Nowlin Ramp Barrel Specification Information
USD 205.99
(Indicative price - actual current price possibly lower)
Specification information: Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard barrel, non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped barrel, fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std, standard barrel, non-ramped. W/n, wilson/nowlin ramp. C/p, clark/para ordnance ramp mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-000-015.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Precision Quality Barrel 6" Kart 1911 Auto Barrel .45 Acp Std Specification Information
USD 177.99
(Indicative price - actual current price possibly lower)
Specification information: Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard barrel, non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped barrel, fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std, standard barrel, non-ramped. W/n, wilson/nowlin ramp. C/p, clark/para ordnance ramp mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-021-045.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Precision Quality Barrel 4.25" Commander Barrel .45 Acp Std Specification Information
USD 198.99
(Indicative price - actual current price possibly lower)
Specification information: Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard barrel, non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped barrel, fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std, standard barrel, non-ramped. W/n, wilson/nowlin ramp. C/p, clark/para ordnance ramp mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-000-013.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Xact Fit Barrel Kit 5" Barrel .40 S&W Fits W/N Specification Information
USD 241.99
(Indicative price - actual current price possibly lower)
Specification information: Install a precision quality barrel using just four small hand tools. The only fitting required is to adjust lockup with the two raised pads located on either side of the rear locking groove, cut the barrel hood to correct length and fit the bushing to the slide. A national match bushing is pre-fit to the barrel; has oversize o.D. For precise fitting to slide. Bottom lugs are fully finished and the correct length link installed to save hours of work. Mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. (n/r) non-ramped. (w/n) wilson/nowlin ramp. (c/p) clark/para ramp. Ramped barrels require machining of frame. Requires gunsmith fitting. Includes instructions. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-002-040.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Xact Fit Barrel Kit 5" Barrel .38 Super Fits N/R Specification Information
USD 227.99
(Indicative price - actual current price possibly lower)
Specification information: Install a precision quality barrel using just four small hand tools. The only fitting required is to adjust lockup with the two raised pads located on either side of the rear locking groove, cut the barrel hood to correct length and fit the bushing to the slide. A national match bushing is pre-fit to the barrel; has oversize o.D. For precise fitting to slide. Bottom lugs are fully finished and the correct length link installed to save hours of work. Mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. (n/r) non-ramped. (w/n) wilson/nowlin ramp. (c/p) clark/para ramp. Ramped barrels require machining of frame. Requires gunsmith fitting. Includes instructions. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-000-001.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Precision Quality Barrel 5" Kart 1911 Auto Barrel .45 Acp W/N Specification Information
USD 185.99
(Indicative price - actual current price possibly lower)
Specification information: Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard barrel, non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped barrel, fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std, standard barrel, non-ramped. W/n, wilson/nowlin ramp. C/p, clark/para ordnance ramp mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-000-002.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Precision Quality Barrel 5" Kart 1911 Auto Barrel .45 Acp C/P Specification Information
USD 179.99
(Indicative price - actual current price possibly lower)
Specification information: Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard barrel, non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped barrel, fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std, standard barrel, non-ramped. W/n, wilson/nowlin ramp. C/p, clark/para ordnance ramp mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-000-004.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Precision Quality Barrel 5" Kart 1911 Auto Barrel .45 Acp Std Specification Information
USD 195.99
(Indicative price - actual current price possibly lower)
Specification information: Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard barrel, non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped barrel, fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std, standard barrel, non-ramped. W/n, wilson/nowlin ramp. C/p, clark/para ordnance ramp mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-020-045.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Precision Quality Barrel 5" Kart 1911 Auto Barrel 9mm Std Specification Information
USD 185.99
(Indicative price - actual current price possibly lower)
Specification information: Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard barrel, non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped barrel, fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std, standard barrel, non-ramped. W/n, wilson/nowlin ramp. C/p, clark/para ordnance ramp mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-000-009.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Precision Quality Barrel 5" Kart 1911 Auto Barrel .38 Super C/P Specification Information
USD 196.99
(Indicative price - actual current price possibly lower)
Specification information: Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard barrel, non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped barrel, fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std, standard barrel, non-ramped. W/n, wilson/nowlin ramp. C/p, clark/para ordnance ramp mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-020-138.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Precision Quality Barrel 5" Kart 1911 Auto Barrel .40 S&W C/P Specification Information
USD 196.99
(Indicative price - actual current price possibly lower)
Specification information: Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard barrel, non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped barrel, fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std, standard barrel, non-ramped. W/n, wilson/nowlin ramp. C/p, clark/para ordnance ramp mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-000-008.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Precision Quality Barrel 5" Kart 1911 Auto Barrel .40 S&W W/N Specification Information
USD 191.99
(Indicative price - actual current price possibly lower)
Specification information: Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard barrel, non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped barrel, fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std, standard barrel, non-ramped. W/n, wilson/nowlin ramp. C/p, clark/para ordnance ramp mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-000-007.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Precision Quality Barrel 5" Kart 1911 Auto Barrel 9mm W/N Specification Information
USD 208.99
(Indicative price - actual current price possibly lower)
Specification information: Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard barrel, non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped barrel, fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std, standard barrel, non-ramped. W/n, wilson/nowlin ramp. C/p, clark/para ordnance ramp mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-000-010.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Xact Fit Barrel Kit 5" Barrel .45 Acp Fits N/R Specification Information
USD 244.99
(Indicative price - actual current price possibly lower)
Specification information: Install a precision quality barrel using just four small hand tools. The only fitting required is to adjust lockup with the two raised pads located on either side of the rear locking groove, cut the barrel hood to correct length and fit the bushing to the slide. A national match bushing is pre-fit to the barrel; has oversize o.D. For precise fitting to slide. Bottom lugs are fully finished and the correct length link installed to save hours of work. Mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. (n/r) non-ramped. (w/n) wilson/nowlin ramp. (c/p) clark/para ramp. Ramped barrels require machining of frame. Requires gunsmith fitting. Includes instructions. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-001-045.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Xact Fit Barrel Kit 5" Barrel .45 Acp Fits W/N Specification Information
USD 227.99
(Indicative price - actual current price possibly lower)
Specification information: Install a precision quality barrel using just four small hand tools. The only fitting required is to adjust lockup with the two raised pads located on either side of the rear locking groove, cut the barrel hood to correct length and fit the bushing to the slide. A national match bushing is pre-fit to the barrel; has oversize o.D. For precise fitting to slide. Bottom lugs are fully finished and the correct length link installed to save hours of work. Mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. (n/r) non-ramped. (w/n) wilson/nowlin ramp. (c/p) clark/para ramp. Ramped barrels require machining of frame. Requires gunsmith fitting. Includes instructions. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-002-045.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Precision Quality Barrel 5" Kart 1911 Auto Barrel .38 Super W/N Specification Information
USD 130.99
(Indicative price - actual current price possibly lower)
Specification information: Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard barrel, non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped barrel, fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std, standard barrel, non-ramped. W/n, wilson/nowlin ramp. C/p, clark/para ordnance ramp mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. Reliable & durable handgun barrels by Kart. Manufacturer MPN: 472-020-038.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Kart Handgun Barrels Specification Info
|
 Copyright © USAGunCache.com : 1997 - 2024 : All rights reserved. 140-UNI
|
|
