Brownells High Speed Steel Wilson Dovetail Cutter .290" X 60Β° Specification Information







HOME PAGE PRODUCTS





Brownells High Speed Steel Wilson Dovetail Cutter .290
Home » Brownells Gunsmith Power Milling Cutters Specification Info

Brownells High Speed Steel Wilson Dovetail Cutter .290" X 60Β° Specification Information


Gunsmith Power Milling Cutters by Brownells



Specification information: 2" (5cm) long. .375" (9.5mm) diameter shaft. 60ß° shoulder. Do not exceed 700 rpm, higher speed will break teeth. Sight is a .300" x 60 degree dovetail that may require machining of slide. Mfg: brownells specs: sight body steel with matte black (blued) finish, .300" x 60 degree dovetail. Installation may require machining of slide. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 080-621-290.

Indicative Price: USD 32.99
(for Actual Current Price, possibly lower,
please click below)


More Info & Supplier : click here


For more high specification gun & shooting products : click here

Try Search on this site - find exactly what you need! Click below:








Visitors interested in this item were also interested in the following:

Brownells Extractor Milling Cutters 5/32" Slot Width .152" Specification Information
Brownells Extractor Milling Cutters 5/32" Slot Width .152" Specification Information

USD 27.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Carbide, center-cutting, four-flute mills precisely cut the groove necessary to install a sako extractor on your remington bolt for positive, reliable extraction. High-cobalt content improves feed rates for fast cutting. Order the cutter that matches the width of your sako extractor. Mfg: brownells specs: high-cobalt carbide. Order cutter that matches your sako extractor slot width. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 11115620.

More Details : click here

SEARCH this site : click here

Brownells Hss Front Sight Dovetail Cutter 60Β°hss Front Sight Dovetail Cutter Specification Information
Brownells Hss Front Sight Dovetail Cutter 60Β°hss Front Sight Dovetail Cutter Specification Information

USD 32.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Cuts lengthwise dovetail required to install special handgun front sights from jim clark, ed brown, bob marvel and others. Slightly undersized to allow for precise final fitting and to compensate for any machine wear. Caution: for use in milling machine only. High speed steel. .300" (7.3mm) diameter cut, 3⁄8" (9.5mm) diameter shank. 60 or 65 shoulder. Do not exceed 700 rpm, higher speed will break teeth. Mfg: brownells. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 8.00003E+11.

More Details : click here

SEARCH this site : click here

Brownells Solid Carbide Center Cut End Mill Cutters 5/16" End Mill Specification Information
Brownells Solid Carbide Center Cut End Mill Cutters 5/16" End Mill Specification Information

USD 51.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly in even tough, hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62mm). ß?" (6.35mm) dia. X .750" (19mm) long ‑cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. 7/16" (11.1mm) dia. X 1" (25.4mm) long c. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 11131250.

More Details : click here

SEARCH this site : click here

Brownells Solid Carbide Ball End Mills 3/8" Carbide Ball End Mill Specification Information
Brownells Solid Carbide Ball End Mills 3/8" Carbide Ball End Mill Specification Information

USD 62.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Four-flute, center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut, right-hand helix. Use in right-hand turning equipment. Single-ended. Premium, high feed rate carbide for hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62cm). ß?" (6.35mm) dia. X .750" (19mm) long cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 14037500.

More Details : click here

SEARCH this site : click here

Brownells Carbide Semi Auto Pistol Sight Base Cutter 60Β°carbide Semi Auto Sight Base Cutter Specification Information
Brownells Carbide Semi Auto Pistol Sight Base Cutter 60Β°carbide Semi Auto Sight Base Cutter Specification Information

USD 85.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Our special 65 shoulder sight base cutter designed to cut dovetails for both standard colt factory and mil-spec 1911 autos, and for replacement sights like wichita hi-mount, older bo- mar and others with a 65 shoulder. Some makers use a 60 dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the standard sight base cutter shown on this page. Actual cutting diameter is  .330" so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. Caution: for use in milling machine only. Solid carbide cutter resists wear when cutting pistol mfg: brownells. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 080-621-066.

More Details : click here

SEARCH this site : click here

Brownells High Speed Steel Standard Sight Base Cutter Hss Standard Sight Base Cutter Specification Information
Brownells High Speed Steel Standard Sight Base Cutter Hss Standard Sight Base Cutter Specification Information

USD 32.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Universal sight base cutter made for sights with 60 shoulder and a 3/8" base. Cuts most standard front and rear rifle sights as well as 1911 auto low-mount, adjustable sights like e.E.A. Super sights, millett and current bo-mar. Cutter is slightly undersized at .359" which requires that you make two cutting passes to compensate for factory variations in sight manufacture and milling tolerances. Designed with proper relief for maximum strength and clean cutting. Caution: for use in milling machine only. 2" (5cm) long. 3/8" (9.5mm) diameter shank. 60 shoulder. Do not exceed 700 rpm, higher speed will break teeth. Mfg: brownells. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 8.00004E+11.

More Details : click here

SEARCH this site : click here

Brownells Solid Carbide End Mills 1/4" (6.35mm) Dia. 2.5" (6.3cm) Overall Specification Information
Brownells Solid Carbide End Mills 1/4" (6.35mm) Dia. 2.5" (6.3cm) Overall Specification Information

USD 29.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: The easiest way to get a good, clean cut in hardened steels. Perfect for altering 1911 slides for low mount style rear. (cut most of slot with mill, finish with dovetail cutter.) gives extended tool life when used in softer metals. 3/16" diameter is the right cutter to use when converting remington m-700 bolts to accept sako-style extractors. Mfg: brownells specs: hardened carbide steel cutters. Available in 3/16" (4.7mm) diameter shank with 5/8" cut length or " (6.35mm) diameter shank with " cut length. 4-flute. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 20501016.

More Details : click here

SEARCH this site : click here

Brownells Solid Carbide End Mills 1/8" (3.17mm) Dia. 1.5" (3.8cm) Overall Specification Information
Brownells Solid Carbide End Mills 1/8" (3.17mm) Dia. 1.5" (3.8cm) Overall Specification Information

USD 20.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: The easiest way to get a good, clean cut in hardened steels. Perfect for altering 1911 slides for low mount style rear. (cut most of slot with mill, finish with dovetail cutter.) gives extended tool life when used in softer metals. 3/16" diameter is the right cutter to use when converting remington m-700 bolts to accept sako-style extractors. Mfg: brownells specs: hardened carbide steel cutters. Available in 3/16" (4.7mm) diameter shank with 5/8" cut length or " (6.35mm) diameter shank with " cut length. 4-flute. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 11112500.

More Details : click here

SEARCH this site : click here

Brownells Solid Carbide Ball End Mills 1/4" Carbide Ball End Mill Specification Information
Brownells Solid Carbide Ball End Mills 1/4" Carbide Ball End Mill Specification Information

USD 45.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Four-flute, center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut, right-hand helix. Use in right-hand turning equipment. Single-ended. Premium, high feed rate carbide for hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62cm). ß?" (6.35mm) dia. X .750" (19mm) long cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 14025000.

More Details : click here

SEARCH this site : click here

Brownells Carbide Front Sight Dovetail Cutter 65Β°carbide Front Sight Dovetail Cutter Specification Information
Brownells Carbide Front Sight Dovetail Cutter 65Β°carbide Front Sight Dovetail Cutter Specification Information

USD 49.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Cuts lengthwise dovetail required to install special handgun front sights from jim clark, ed brown, bob marvel and others. Slightly undersized to allow for precise final fitting and to compensate for any machine wear. Caution: for use in milling machine only. Solid carbide resists wear and easily cuts through even hardened steels. .300" (7.3mm) dia. Cut, 3⁄8" (9.5mm) dia. Shank. 60 or 65 shoulder. Mfg: brownells. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 080-621-963.

More Details : click here

SEARCH this site : click here

Brownells Solid Carbide Center Cut End Mill Cutters 7/16" End Mill Specification Information
Brownells Solid Carbide Center Cut End Mill Cutters 7/16" End Mill Specification Information

USD 60.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly in even tough, hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62mm). ß?" (6.35mm) dia. X .750" (19mm) long ‑cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. 7/16" (11.1mm) dia. X 1" (25.4mm) long c. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 11143750.

More Details : click here

SEARCH this site : click here

Brownells Cryo Treated Dovetail Cutter 65Β° X .300" Specification Information
Brownells Cryo Treated Dovetail Cutter 65Β° X .300" Specification Information

USD 45.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320β°f to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we've added two rings near the working end to differentiate them from our regular cutters. Do not exceed 700 rpm or cutters will break. Mfg: brownells specs: cryo-treated, high-speed steel. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 080-000-279.

More Details : click here

SEARCH this site : click here

Brownells Cryo Treated Dovetail Cutter 65Β° X .490" Specification Information
Brownells Cryo Treated Dovetail Cutter 65Β° X .490" Specification Information

USD 52.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320β°f to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we've added two rings near the working end to differentiate them from our regular cutters. Do not exceed 700 rpm or cutters will break. Mfg: brownells specs: cryo-treated, high-speed steel. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 080-000-278.

More Details : click here

SEARCH this site : click here

Brownells Cryo Treated Dovetail Cutter 74Β° X .250" Specification Information
Brownells Cryo Treated Dovetail Cutter 74Β° X .250" Specification Information

USD 59.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320β°f to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we've added two rings near the working end to differentiate them from our regular cutters. Do not exceed 700 rpm or cutters will break. Mfg: brownells specs: cryo-treated, high-speed steel. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 080-000-272.

More Details : click here

SEARCH this site : click here

Brownells Solid Carbide Center Cut End Mill Cutters 3/8" End Mill Specification Information
Brownells Solid Carbide Center Cut End Mill Cutters 3/8" End Mill Specification Information

USD 53.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly in even tough, hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62mm). ß?" (6.35mm) dia. X .750" (19mm) long ‑cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. 7/16" (11.1mm) dia. X 1" (25.4mm) long c. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 11137500.

More Details : click here

SEARCH this site : click here






  • FROM SAME CATEGORY : Brownells Gunsmith Power Milling Cutters Specification Info : click here!

  • PRODUCT LIST : by product category : click here!
    		•
    307-2-RGB




    Try Search on this site - find exactly what you need! Click below:




    Home » Brownells Gunsmith Power Milling Cutters Specification Info
    Item on this page: Brownells High Speed Steel Wilson Dovetail Cutter .290" X 60Β° Specification Information

    Home Page Search Products Contact Us Privacy Policy


    Copyright © USAGunCache.com : 1997 - 2026 : All rights reserved. 140-UNI