Brownells Heat Stop Heat Control Paste Heat Stop Specification Information







HOME PAGE PRODUCTS





Brownells Heat Stop Heat Control Paste Heat Stop Specification Information
Home » Brownells Gunsmith Heat Treating Accessories Specification Info

Brownells Heat Stop Heat Control Paste Heat Stop Specification Information


Gunsmith Heat Treating Accessories by Brownells



Specification information: Fantastic compound prevents heat transfer so effectively you can heat one end of a steel bar red hot, while holding the other end in your bare hand! absorbs heat that would cause adjacent parts damage during welding, brazing, heat-treating and soldering. One of the greatest chemical developments ever for the gunsmith. For welding bolt knobs, shortening actions, installing ramps and sights, plus all milling and grinding operations where it protects expensive, hard-to-replace drill bits and cutters, as well as the gun. Odorless, non-toxic, no fumes, won't harm skin, won't stain surfaces applied to, won't melt or run, and cleans up easily with water. Mfg: brownells specs: 1 lb. (453.6g) net weight. Reliable & durable gunsmith heat treating accessories by Brownells. Manufacturer MPN: 083-012-100.

Indicative Price: USD 16.99
(for Actual Current Price, possibly lower,
please click below)


More Info & Supplier : click here


For more high specification gun & shooting products : click here

Try Search on this site - find exactly what you need! Click below:








Visitors interested in this item were also interested in the following:

Brownells Non Scaling Compound Specification Information
Brownells Non Scaling Compound Specification Information

USD 24.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Heat Treating Accessories Specification Info
Specification information: Saves hours of polishing, grinding, shaping, parts can be made to exact dimensions before heat treating without fear of dimension change from scaling, pitting, decarb loss. Extremely simple to use, for both hardening or annealing. Heat the work piece to about 500 f., coat with the dry compound powder, finish heating to temperature, and quench/cool as required. Parts come clean in boiling water. Mfg: brownells specs: 1 lb. (454 g). Not for steels that harden above 1650 f. Reliable & durable gunsmith heat treating accessories by Brownells. Manufacturer MPN: 083-015-100.

More Details : click here

SEARCH this site : click here

Brownells Tough Quench ing Oil 1 Gal. Tough Quench Specification Information
Brownells Tough Quench ing Oil 1 Gal. Tough Quench Specification Information

USD 59.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Heat Treating Accessories Specification Info
Specification information: Developed specifically for predictable, controlled, fast quenching speed to consistently give a uniform, high. Oil quenching hardness. Oil soluble agents wet out work rapidly, prevents formation of gas pockets. Less smoke, low rate of heat transfer to minimize distortion and cracking of the steel. Can be shipped ups. Mfg: brownells specs: 1 qt. (16 fl. Oz./946 ml), 1 gal. (128 fl. Oz./3.8 l) in cans. Flash point is 355&#176 f. (179.4&#176 c.); fire point is 410&#176 f. (210&#176 c.). Reliable & durable gunsmith heat treating accessories by Brownells. Manufacturer MPN: 083-027-128.

More Details : click here

SEARCH this site : click here

Brownells Stainless Steel Heat Treat Foil Stainless Steel Foil Piece Specification Information
Brownells Stainless Steel Heat Treat Foil Stainless Steel Foil Piece Specification Information

USD 21.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Heat Treating Accessories Specification Info
Specification information: For scale-free, furnace heat treating of tool steel without an atmosphere-controlled furnace. Saves hours of clean-up. Make parts without losing tolerances due to scale. To use: clean part, wrap sharp corners with a layer of brown wrapping paper to protect the foil. Wrap part with foil, fold edges double and seal with wallpaper steam roller. Heat treat as usual. Open foil, remove part and air cool or quench. Wear gloves; edges are very sharp! mfg: brownells specs: .002" (.051mm) thick. Piece- 24" (61cm) x 24" (61cm). Made of 321 ss. Reliable & durable gunsmith heat treating accessories by Brownells. Manufacturer MPN: 080-656-001.

More Details : click here

SEARCH this site : click here

Brownells Tough Quench ing Oil 1 Qt. Tough Quench Specification Information
Brownells Tough Quench ing Oil 1 Qt. Tough Quench Specification Information

USD 18.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Heat Treating Accessories Specification Info
Specification information: Developed specifically for predictable, controlled, fast quenching speed to consistently give a uniform, high. Oil quenching hardness. Oil soluble agents wet out work rapidly, prevents formation of gas pockets. Less smoke, low rate of heat transfer to minimize distortion and cracking of the steel. Can be shipped ups. Mfg: brownells specs: 1 qt. (16 fl. Oz./946 ml), 1 gal. (128 fl. Oz./3.8 l) in cans. Flash point is 355&#176 f. (179.4&#176 c.); fire point is 410&#176 f. (210&#176 c.). Reliable & durable gunsmith heat treating accessories by Brownells. Manufacturer MPN: 083-027-032.

More Details : click here

SEARCH this site : click here






  • FROM SAME CATEGORY : Brownells Gunsmith Heat Treating Accessories Specification Info : click here!

  • PRODUCT LIST : by product category : click here!
    		•
    307-2-RGB




    Try Search on this site - find exactly what you need! Click below:




    Home » Brownells Gunsmith Heat Treating Accessories Specification Info
    Item on this page: Brownells Heat Stop Heat Control Paste Heat Stop Specification Information

    Home Page Search Products Contact Us Privacy Policy


    Copyright © USAGunCache.com : 1997 - 2026 : All rights reserved. 140-UNI