Brownells Carbide Front Sight Dovetail Cutter 60Β°carbide Front Sight Dovetail Cutter Specification Information







HOME PAGE PRODUCTS





Brownells Carbide Front Sight Dovetail Cutter 60Β°carbide Front Sight Dovetail Cutter Specification Information
Home » Brownells Gunsmith Power Milling Cutters Specification Info

Brownells Carbide Front Sight Dovetail Cutter 60Β°carbide Front Sight Dovetail Cutter Specification Information


Gunsmith Power Milling Cutters by Brownells



Specification information: Cuts lengthwise dovetail required to install special handgun front sights from jim clark, ed brown, bob marvel and others. Slightly undersized to allow for precise final fitting and to compensate for any machine wear. Caution: for use in milling machine only. Solid carbide resists wear and easily cuts through even hardened steels. .300" (7.3mm) dia. Cut, 3⁄8" (9.5mm) dia. Shank. 60 or 65 shoulder. Mfg: brownells. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 080-621-960.

Indicative Price: USD 69.99
(for Actual Current Price, possibly lower,
please click below)


More Info & Supplier : click here


For more high specification gun & shooting products : click here

Try Search on this site - find exactly what you need! Click below:








Visitors interested in this item were also interested in the following:

Brownells Extractor Milling Cutters 5/32" Slot Width .152" Specification Information
Brownells Extractor Milling Cutters 5/32" Slot Width .152" Specification Information

USD 27.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Carbide, center-cutting, four-flute mills precisely cut the groove necessary to install a sako extractor on your remington bolt for positive, reliable extraction. High-cobalt content improves feed rates for fast cutting. Order the cutter that matches the width of your sako extractor. Mfg: brownells specs: high-cobalt carbide. Order cutter that matches your sako extractor slot width. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 11115620.

More Details : click here

SEARCH this site : click here

Brownells Solid Carbide Center Cut End Mill Cutters 7/16" End Mill Specification Information
Brownells Solid Carbide Center Cut End Mill Cutters 7/16" End Mill Specification Information

USD 60.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly in even tough, hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62mm). ß?" (6.35mm) dia. X .750" (19mm) long ‑cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. 7/16" (11.1mm) dia. X 1" (25.4mm) long c. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 11143750.

More Details : click here

SEARCH this site : click here

Brownells Solid Carbide Ball End Mills 5/16" Carbide Ball End Mill Specification Information
Brownells Solid Carbide Ball End Mills 5/16" Carbide Ball End Mill Specification Information

USD 57.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Four-flute, center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut, right-hand helix. Use in right-hand turning equipment. Single-ended. Premium, high feed rate carbide for hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62cm). ß?" (6.35mm) dia. X .750" (19mm) long cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 14031250.

More Details : click here

SEARCH this site : click here

Brownells Meprolight Dovetail Cutter .250" X 74Β° Specification Information
Brownells Meprolight Dovetail Cutter .250" X 74Β° Specification Information

USD 32.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Cuts the .250" x 74 dovetail required when altering ramp-style front sights to accept meprolight's universal front sight inserts. Cutter can be used to open up a standard ramp when installing brownells colored sight inserts. Do not exceed 700 rpm. Higher speed will break teeth. Mfg: brownells. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 080-621-250.

More Details : click here

SEARCH this site : click here

Brownells Solid Carbide Center Cut End Mill Cutters 1/4" End Mill Specification Information
Brownells Solid Carbide Center Cut End Mill Cutters 1/4" End Mill Specification Information

USD 38.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly in even tough, hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62mm). ß?" (6.35mm) dia. X .750" (19mm) long ‑cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. 7/16" (11.1mm) dia. X 1" (25.4mm) long c. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 11125000.

More Details : click here

SEARCH this site : click here

Brownells Solid Carbide Center Cut End Mill Cutters 5/16" End Mill Specification Information
Brownells Solid Carbide Center Cut End Mill Cutters 5/16" End Mill Specification Information

USD 51.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly in even tough, hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62mm). ß?" (6.35mm) dia. X .750" (19mm) long ‑cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. 7/16" (11.1mm) dia. X 1" (25.4mm) long c. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 11131250.

More Details : click here

SEARCH this site : click here

Brownells Hss Front Sight Dovetail Cutter 65Β°hss Front Sight Dovetail Cutter Specification Information
Brownells Hss Front Sight Dovetail Cutter 65Β°hss Front Sight Dovetail Cutter Specification Information

USD 32.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Cuts lengthwise dovetail required to install special handgun front sights from jim clark, ed brown, bob marvel and others. Slightly undersized to allow for precise final fitting and to compensate for any machine wear. Caution: for use in milling machine only. High speed steel. .300" (7.3mm) diameter cut, 3⁄8" (9.5mm) diameter shank. 60 or 65 shoulder. Do not exceed 700 rpm, higher speed will break teeth. Mfg: brownells. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 080-621-305.

More Details : click here

SEARCH this site : click here

Brownells Carbide Semi Auto Pistol Sight Base Cutter 65Β°carbide Semi Auto Sight Base Cutter Specification Information
Brownells Carbide Semi Auto Pistol Sight Base Cutter 65Β°carbide Semi Auto Sight Base Cutter Specification Information

USD 89.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Our special 65 shoulder sight base cutter designed to cut dovetails for both standard colt factory and mil-spec 1911 autos, and for replacement sights like wichita hi-mount, older bo- mar and others with a 65 shoulder. Some makers use a 60 dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the standard sight base cutter shown on this page. Actual cutting diameter is  .330" so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. Caution: for use in milling machine only. Solid carbide cutter resists wear when cutting pistol mfg: brownells. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 65X330CARBID.

More Details : click here

SEARCH this site : click here

Brownells Solid Carbide Ball End Mills 1/4" Carbide Ball End Mill Specification Information
Brownells Solid Carbide Ball End Mills 1/4" Carbide Ball End Mill Specification Information

USD 45.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Four-flute, center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut, right-hand helix. Use in right-hand turning equipment. Single-ended. Premium, high feed rate carbide for hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62cm). ß?" (6.35mm) dia. X .750" (19mm) long cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 14025000.

More Details : click here

SEARCH this site : click here

Brownells Heinie Rear Sight Cutter Carbide Heinie Rear Sight Cutter Specification Information
Brownells Heinie Rear Sight Cutter Carbide Heinie Rear Sight Cutter Specification Information

USD 37.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Cuts the .370 x 65 dovetail required when fitting heinie rear sights. Solid carbide cuts the hardest slides with minimal wear. Mfg: brownells. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 080-621-371.

More Details : click here

SEARCH this site : click here

Brownells Solid Carbide Center Cut End Mill Cutters 1/2" End Mill Specification Information
Brownells Solid Carbide Center Cut End Mill Cutters 1/2" End Mill Specification Information

USD 84.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly in even tough, hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62mm). ß?" (6.35mm) dia. X .750" (19mm) long ‑cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. 7/16" (11.1mm) dia. X 1" (25.4mm) long c. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 11150000.

More Details : click here

SEARCH this site : click here

Brownells Cryo Treated Dovetail Cutter 60Β° X .290" Specification Information
Brownells Cryo Treated Dovetail Cutter 60Β° X .290" Specification Information

USD 41.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320β°f to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we've added two rings near the working end to differentiate them from our regular cutters. Do not exceed 700 rpm or cutters will break. Mfg: brownells specs: cryo-treated, high-speed steel. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 080-000-273.

More Details : click here

SEARCH this site : click here

Brownells Solid Carbide End Mills 3/16" (4.7mm) Dia. 2" (5cm) Overall Specification Information
Brownells Solid Carbide End Mills 3/16" (4.7mm) Dia. 2" (5cm) Overall Specification Information

USD 22.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: The easiest way to get a good, clean cut in hardened steels. Perfect for altering 1911 slides for low mount style rear. (cut most of slot with mill, finish with dovetail cutter.) gives extended tool life when used in softer metals. 3/16" diameter is the right cutter to use when converting remington m-700 bolts to accept sako-style extractors. Mfg: brownells specs: hardened carbide steel cutters. Available in 3/16" (4.7mm) diameter shank with 5/8" cut length or " (6.35mm) diameter shank with " cut length. 4-flute. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 20501012.

More Details : click here

SEARCH this site : click here

Brownells Cryo Treated Dovetail Cutter 60Β° X .300" Specification Information
Brownells Cryo Treated Dovetail Cutter 60Β° X .300" Specification Information

USD 54.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320β°f to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we've added two rings near the working end to differentiate them from our regular cutters. Do not exceed 700 rpm or cutters will break. Mfg: brownells specs: cryo-treated, high-speed steel. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 080-000-274.

More Details : click here

SEARCH this site : click here

Brownells Carbide Semi Auto Pistol Sight Base Cutter 60Β°carbide Semi Auto Sight Base Cutter Specification Information
Brownells Carbide Semi Auto Pistol Sight Base Cutter 60Β°carbide Semi Auto Sight Base Cutter Specification Information

USD 85.99
(Indicative price - actual current price possibly lower)
Brownells Gunsmith Power Milling Cutters Specification Info
Specification information: Our special 65 shoulder sight base cutter designed to cut dovetails for both standard colt factory and mil-spec 1911 autos, and for replacement sights like wichita hi-mount, older bo- mar and others with a 65 shoulder. Some makers use a 60 dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the standard sight base cutter shown on this page. Actual cutting diameter is  .330" so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. Caution: for use in milling machine only. Solid carbide cutter resists wear when cutting pistol mfg: brownells. Reliable & durable gunsmith power milling cutters by Brownells. Manufacturer MPN: 080-621-066.

More Details : click here

SEARCH this site : click here






  • FROM SAME CATEGORY : Brownells Gunsmith Power Milling Cutters Specification Info : click here!

  • PRODUCT LIST : by product category : click here!
    		•
    307-2-RGB




    Try Search on this site - find exactly what you need! Click below:




    Home » Brownells Gunsmith Power Milling Cutters Specification Info
    Item on this page: Brownells Carbide Front Sight Dovetail Cutter 60Β°carbide Front Sight Dovetail Cutter Specification Information

    Home Page Search Products Contact Us Privacy Policy


    Copyright © USAGunCache.com : 1997 - 2026 : All rights reserved. 140-UNI