Apex Tool Group Swiss Pattern Barrette Files 6" Barrette #0 Cut Specification Information







HOME PAGE PRODUCTS





Apex Tool Group Swiss Pattern Barrette Files 6
Home » Apex Gunsmith Files Specification Info

Apex Tool Group Swiss Pattern Barrette Files 6" Barrette #0 Cut Specification Information


Gunsmith Files by Apex



Specification information: These beautiful little swiss pattern files are made especially for getting into tight places, coming exactly up to right angles, working over dovetails, slots and other precision filing. Flat side has double-cut teeth. Back and edges are safe (no teeth) with edges beveled back on 33β° angle. Taper from maximum width shown below to long point. Mfg: apex tool group specs: 4" (10.2cm), 1/2" (12.7mm) wide. #0 or #1 cut. 6" (15.2cm), 11/16" (17.5mm) wide. #0, #1 or #2 cut. Vkhilfef corresponds to swiss cut no. 1. Reliable & durable gunsmith files by Apex. Manufacturer MPN: 35061.

Indicative Price: USD 37.99
(for Actual Current Price, possibly lower,
please click below)


More Info & Supplier : click here


For more high specification gun & shooting products : click here

Try Search on this site - find exactly what you need! Click below:








Visitors interested in this item were also interested in the following:

Apex Tool Group Mill Files Second Cut 6" (15.2cm) Specification Information
Apex Tool Group Mill Files Second Cut 6" (15.2cm) Specification Information

USD 10.99
(Indicative price - actual current price possibly lower)
Apex Gunsmith Files Specification Info
Specification information: Made especially for draw-filing and finishing metals. Taper slightly in width, thickness stays the same over the entire length. Both edges are square. Single cut on sides and edges. Mfg: apex tool group specs: 6" (15.2cm), 19⁄32" (7.1mm) wide x 7⁄64" (2.8mm) thick. 8" (20.3cm), 25⁄32" (19.9mm) wide x 9⁄64" (3.6mm) thick. 10" (25.4cm), 31⁄32" (24.6mm) wide x 11⁄64" (4.4mm) thick. Reliable & durable gunsmith files by Apex. Manufacturer MPN: 8385.

More Details : click here

SEARCH this site : click here

Apex Tool Group Standard Pillar Files Swiss Pattern #0 Cut 6" Standard Pillar File Specification Information
Apex Tool Group Standard Pillar Files Swiss Pattern #0 Cut 6" Standard Pillar File Specification Information

USD 21.99
(Indicative price - actual current price possibly lower)
Apex Gunsmith Files Specification Info
Specification information: Similar in shape to the hand files, but only about two-thirds as wide. Double-cut on sides; edges are safe. Swiss pattern. Mfg: apex tool group specs: 4" (10.2cm) #0 & #2 cut, 23⁄64" (9.1mm) wide x 7⁄64" (2.8mm) thick. 6" (15.2cm) #00, #0 & #2 cut, 15⁄32" (11.9mm) wide x 9⁄64" (3.6mm) thick. 8" (20.3cm) #00, #0, #2 cut, 39⁄64" (15.5mm) wide x 13⁄64" (5.2mm) thick. Reliable & durable gunsmith files by Apex. Manufacturer MPN: 39899.

More Details : click here

SEARCH this site : click here

Apex Tool Group Standard Pillar Files Swiss Pattern #2 Cut 4" Standard Pillar File Specification Information
Apex Tool Group Standard Pillar Files Swiss Pattern #2 Cut 4" Standard Pillar File Specification Information

USD 24.99
(Indicative price - actual current price possibly lower)
Apex Gunsmith Files Specification Info
Specification information: Similar in shape to the hand files, but only about two-thirds as wide. Double-cut on sides; edges are safe. Swiss pattern. Mfg: apex tool group specs: 4" (10.2cm) #0 & #2 cut, 23⁄64" (9.1mm) wide x 7⁄64" (2.8mm) thick. 6" (15.2cm) #00, #0 & #2 cut, 15⁄32" (11.9mm) wide x 9⁄64" (3.6mm) thick. 8" (20.3cm) #00, #0, #2 cut, 39⁄64" (15.5mm) wide x 13⁄64" (5.2mm) thick. Reliable & durable gunsmith files by Apex. Manufacturer MPN: 39873.

More Details : click here

SEARCH this site : click here

Apex Tool Group Standard Pillar Files Swiss Pattern #00 Cut 8" Standard Pillar File Specification Information
Apex Tool Group Standard Pillar Files Swiss Pattern #00 Cut 8" Standard Pillar File Specification Information

USD 35.99
(Indicative price - actual current price possibly lower)
Apex Gunsmith Files Specification Info
Specification information: Similar in shape to the hand files, but only about two-thirds as wide. Double-cut on sides; edges are safe. Swiss pattern. Mfg: apex tool group specs: 4" (10.2cm) #0 & #2 cut, 23⁄64" (9.1mm) wide x 7⁄64" (2.8mm) thick. 6" (15.2cm) #00, #0 & #2 cut, 15⁄32" (11.9mm) wide x 9⁄64" (3.6mm) thick. 8" (20.3cm) #00, #0, #2 cut, 39⁄64" (15.5mm) wide x 13⁄64" (5.2mm) thick. Reliable & durable gunsmith files by Apex. Manufacturer MPN: 39929N.

More Details : click here

SEARCH this site : click here

Apex Tool Group Swiss Pattern Barrette Files 6" Barrette #2 Cut Specification Information
Apex Tool Group Swiss Pattern Barrette Files 6" Barrette #2 Cut Specification Information

USD 38.99
(Indicative price - actual current price possibly lower)
Apex Gunsmith Files Specification Info
Specification information: These beautiful little swiss pattern files are made especially for getting into tight places, coming exactly up to right angles, working over dovetails, slots and other precision filing. Flat side has double-cut teeth. Back and edges are safe (no teeth) with edges beveled back on 33β° angle. Taper from maximum width shown below to long point. Mfg: apex tool group specs: 4" (10.2cm), 1/2" (12.7mm) wide. #0 or #1 cut. 6" (15.2cm), 11/16" (17.5mm) wide. #0, #1 or #2 cut. Vkhilfef corresponds to swiss cut no. 1. Reliable & durable gunsmith files by Apex. Manufacturer MPN: 35073.

More Details : click here

SEARCH this site : click here

Apex Tool Group Round Files 1/8" Round File Specification Information
Apex Tool Group Round Files 1/8" Round File Specification Information

USD 7.99
(Indicative price - actual current price possibly lower)
Apex Gunsmith Files Specification Info
Specification information: American pattern, smooth cut round files allow even, gradual metal removal for an outstanding finish. Available in several different diameters to handle a variety of jobs. Mfg: apex tool group specs: steel, round files. 7" (15cm) long x 1⁄8" (3.2cm) or 5⁄32" (3.9cm) dia.; 9" (15cm) long x 3⁄16" (4.7cm), 7⁄32" (5.5cm), or " (6.3cm) dia. Reliable & durable gunsmith files by Apex. Manufacturer MPN: 191-000-003.

More Details : click here

SEARCH this site : click here

Apex Tool Group Round Files 3/16" Round File Specification Information
Apex Tool Group Round Files 3/16" Round File Specification Information

USD 6.99
(Indicative price - actual current price possibly lower)
Apex Gunsmith Files Specification Info
Specification information: American pattern, smooth cut round files allow even, gradual metal removal for an outstanding finish. Available in several different diameters to handle a variety of jobs. Mfg: apex tool group specs: steel, round files. 7" (15cm) long x 1⁄8" (3.2cm) or 5⁄32" (3.9cm) dia.; 9" (15cm) long x 3⁄16" (4.7cm), 7⁄32" (5.5cm), or " (6.3cm) dia. Reliable & durable gunsmith files by Apex. Manufacturer MPN: 1765.

More Details : click here

SEARCH this site : click here

Apex Tool Group Swiss Pattern Barrette Files 6" Barrette #1 Cut Specification Information
Apex Tool Group Swiss Pattern Barrette Files 6" Barrette #1 Cut Specification Information

USD 42.99
(Indicative price - actual current price possibly lower)
Apex Gunsmith Files Specification Info
Specification information: These beautiful little swiss pattern files are made especially for getting into tight places, coming exactly up to right angles, working over dovetails, slots and other precision filing. Flat side has double-cut teeth. Back and edges are safe (no teeth) with edges beveled back on 33β° angle. Taper from maximum width shown below to long point. Mfg: apex tool group specs: 4" (10.2cm), 1/2" (12.7mm) wide. #0 or #1 cut. 6" (15.2cm), 11/16" (17.5mm) wide. #0, #1 or #2 cut. Vkhilfef corresponds to swiss cut no. 1. Reliable & durable gunsmith files by Apex. Manufacturer MPN: 31029.

More Details : click here

SEARCH this site : click here

Apex Tool Group Mill Files Second Cut 10" (25.4cm) Specification Information
Apex Tool Group Mill Files Second Cut 10" (25.4cm) Specification Information

USD 15.99
(Indicative price - actual current price possibly lower)
Apex Gunsmith Files Specification Info
Specification information: Made especially for draw-filing and finishing metals. Taper slightly in width, thickness stays the same over the entire length. Both edges are square. Single cut on sides and edges. Mfg: apex tool group specs: 6" (15.2cm), 19⁄32" (7.1mm) wide x 7⁄64" (2.8mm) thick. 8" (20.3cm), 25⁄32" (19.9mm) wide x 9⁄64" (3.6mm) thick. 10" (25.4cm), 31⁄32" (24.6mm) wide x 11⁄64" (4.4mm) thick. Reliable & durable gunsmith files by Apex. Manufacturer MPN: 8673.

More Details : click here

SEARCH this site : click here

Apex Tool Group Round Files 5/32" Round File Specification Information
Apex Tool Group Round Files 5/32" Round File Specification Information

USD 6.99
(Indicative price - actual current price possibly lower)
Apex Gunsmith Files Specification Info
Specification information: American pattern, smooth cut round files allow even, gradual metal removal for an outstanding finish. Available in several different diameters to handle a variety of jobs. Mfg: apex tool group specs: steel, round files. 7" (15cm) long x 1⁄8" (3.2cm) or 5⁄32" (3.9cm) dia.; 9" (15cm) long x 3⁄16" (4.7cm), 7⁄32" (5.5cm), or " (6.3cm) dia. Reliable & durable gunsmith files by Apex. Manufacturer MPN: 1630.

More Details : click here

SEARCH this site : click here

Apex Tool Group Standard Pillar Files Swiss Pattern #0 Cut 4" Standard Pillar File Specification Information
Apex Tool Group Standard Pillar Files Swiss Pattern #0 Cut 4" Standard Pillar File Specification Information

USD 21.99
(Indicative price - actual current price possibly lower)
Apex Gunsmith Files Specification Info
Specification information: Similar in shape to the hand files, but only about two-thirds as wide. Double-cut on sides; edges are safe. Swiss pattern. Mfg: apex tool group specs: 4" (10.2cm) #0 & #2 cut, 23⁄64" (9.1mm) wide x 7⁄64" (2.8mm) thick. 6" (15.2cm) #00, #0 & #2 cut, 15⁄32" (11.9mm) wide x 9⁄64" (3.6mm) thick. 8" (20.3cm) #00, #0, #2 cut, 39⁄64" (15.5mm) wide x 13⁄64" (5.2mm) thick. Reliable & durable gunsmith files by Apex. Manufacturer MPN: 39861.

More Details : click here

SEARCH this site : click here

Apex Tool Group Round Files 1/4" Round File Specification Information
Apex Tool Group Round Files 1/4" Round File Specification Information

USD 6.99
(Indicative price - actual current price possibly lower)
Apex Gunsmith Files Specification Info
Specification information: American pattern, smooth cut round files allow even, gradual metal removal for an outstanding finish. Available in several different diameters to handle a variety of jobs. Mfg: apex tool group specs: steel, round files. 7" (15cm) long x 1⁄8" (3.2cm) or 5⁄32" (3.9cm) dia.; 9" (15cm) long x 3⁄16" (4.7cm), 7⁄32" (5.5cm), or " (6.3cm) dia. Reliable & durable gunsmith files by Apex. Manufacturer MPN: 1974.

More Details : click here

SEARCH this site : click here

Apex Tool Group American Pattern Hand Files 2nd Cut 8" Specification Information
Apex Tool Group American Pattern Hand Files 2nd Cut 8" Specification Information

USD 15.99
(Indicative price - actual current price possibly lower)
Apex Gunsmith Files Specification Info
Specification information: One of the basic gun work files and an excellent, all purpose file for dressing, striking off, shaping and metal removing of all types. Parallel in width, taper slightly in thickness. Double-cut sides; one edge is single-cut, other is safe. Mfg: apex tool group specs: 8" (20.3cm) american, 25/32" (19.8mm) wide x 7/32" (5.6mm) thick. 10" (25.4cm) american, 31/32" (24.6mm) wide x βό" (6.3mm) thick. Reliable & durable gunsmith files by Apex. Manufacturer MPN: 05886N.

More Details : click here

SEARCH this site : click here

Apex Tool Group Mill Files Smooth Cut 8" (20.3cm) Specification Information
Apex Tool Group Mill Files Smooth Cut 8" (20.3cm) Specification Information

USD 13.99
(Indicative price - actual current price possibly lower)
Apex Gunsmith Files Specification Info
Specification information: Made especially for draw-filing and finishing metals. Taper slightly in width, thickness stays the same over the entire length. Both edges are square. Single cut on sides and edges. Mfg: apex tool group specs: 6" (15.2cm), 19⁄32" (7.1mm) wide x 7⁄64" (2.8mm) thick. 8" (20.3cm), 25⁄32" (19.9mm) wide x 9⁄64" (3.6mm) thick. 10" (25.4cm), 31⁄32" (24.6mm) wide x 11⁄64" (4.4mm) thick. Reliable & durable gunsmith files by Apex. Manufacturer MPN: 8560.

More Details : click here

SEARCH this site : click here

Apex Tool Group Mill Files Bastard Cut 6" (15.2cm) Specification Information
Apex Tool Group Mill Files Bastard Cut 6" (15.2cm) Specification Information

USD 8.99
(Indicative price - actual current price possibly lower)
Apex Gunsmith Files Specification Info
Specification information: Made especially for draw-filing and finishing metals. Taper slightly in width, thickness stays the same over the entire length. Both edges are square. Single cut on sides and edges. Mfg: apex tool group specs: 6" (15.2cm), 19⁄32" (7.1mm) wide x 7⁄64" (2.8mm) thick. 8" (20.3cm), 25⁄32" (19.9mm) wide x 9⁄64" (3.6mm) thick. 10" (25.4cm), 31⁄32" (24.6mm) wide x 11⁄64" (4.4mm) thick. Reliable & durable gunsmith files by Apex. Manufacturer MPN: 8354.

More Details : click here

SEARCH this site : click here






  • FROM SAME CATEGORY : Apex Gunsmith Files Specification Info : click here!

  • PRODUCT LIST : by product category : click here!
    		•
    307-2-RGB




    Try Search on this site - find exactly what you need! Click below:




    Home » Apex Gunsmith Files Specification Info
    Item on this page: Apex Tool Group Swiss Pattern Barrette Files 6" Barrette #0 Cut Specification Information

    Home Page Search Products Contact Us Privacy Policy


    Copyright © USAGunCache.com : 1997 - 2026 : All rights reserved. 140-UNI